Juliana Jewelry Blog

How to Identify Juliana Jewelry – Chapter 2

Posted on: July 15, 2009

The Construction Characteristics of Juliana Jewelry

As this most popular jewelry is unsigned, or was signed w/hang tags and/or cards that have been lost or discarded over the years, the only way to distinguish it from other jewelry is to study its construction.

The most easily identifiable construction characteristic of D&E jewelry is known as figure 8 puddling. The term was coined by Cheryl Kilmer of Past Perfection Jewelry and refers to the soldering characteristics that occur between the cups of 2 and 3 section chaton (a small, round rhinestone w/8 cuts) settings. To save time and money, D&E employed a soldering technique that would string together these setting, and the result gave a figure 8 appearance. Also, the prong placements on these settings was different from that of a tradition setting, giving a claw-like appearance. (click images below for an enlarged view)

So… if you see a piece of jewelry w/figure 8 puddling, it is, no doubt D&E (at this time, I am unaware of any reproductions of this technique).

So what if a piece of jewelry doesn’t have figure 8 puddling? What are the other construction characteristics of D&E jewelry? Well… there are a number of other identifiable signs, that when put together, tell us that a piece of jewelry is or is not D&E. Those include (thumbnails click for a larger view):

An Attached Pin Assembly – while not all D&E had this pin assembly type (the figurals are one exception), this is the most common type of D&E pin. I will post an article highlighting all the types of pin assemblies that I have found on D&E at a later date – check back shortly.

Prong Set Stones – D&E jewelry was hand-made and hand set. Most of that setting was prong setting, but not all. However, D&E jewelry will be all prong set or mostly prong set. If a piece is mostly pasted or it has faux prongs, it’s not D&E.

Earring Clips – the majority of D&E earrings have clips w/holes in them. You will, however, on a rare occasion, find a pair of earrings w/a sold clip – but these are few and far between. Below is a gallery of the earring clip types that I have come across on Juliana Jewelry.

Odd Number Construction – The symmetry of odd number design appealed to D&E and their pieces are found w/5 links, as in bracelets or necklaces, or 5 dangles, as on brooches. You can, on a rare occasion, find a bracelet constructed w/4 or 6 links – these are “customized” pieces designed to fit either a larger or smaller wrist.

Casted Portions w/Pasted in Chatons – D&E did employ pasted portions and these were done in parts of the jewelry that were casted – often making stems and design accents. This construction technique is why not all D&E is prong set, and it’s quite commonly found in D&E jewelry.

Rhinestone Chains – D&E often employed the use of rhinestone chains to create stems or necklace chains or dangles.

Wire Reinforcement – D&E did a lot of wire work and used long wires soldered onto the setting for stabilization and reinforcement. These are most often found on flower brooches. D&E also uses a round, washer-like wire to reinforce an entire setting, as seen in picture 2 below.

Wire & Wire Over Work – D&E used wire work to create stems and a 3D or layered effect to flower heads. Wire over work can also be seen on florettes that are designed to mimic leaves.

Square Wire & Eyelet Construction for Dangles – Competition was fierce, and still is, in the jewelry trade, and manufactures were all putting out similar designs based on trends and fads and what was selling. Dangles pieces were common, and in order to tell D&E from the rest, you need to look for the use of a square wire and an eyelet or rivet construction.

Florets – D&E employed what I have termed florettes to give pieces a 3D floral look, and attached them to the jewelry w/an eyelet.

Back of Setting – It’s often touted that D&E only has an all open-backed setting. This is simply not true. D&E has all 3 types of setting backs, and all are quite common – all open, combination open/closed, and all closed.

For my next article, I will be discussing the types of settings used by D&E and will put together a gallery of findings and stones – check back shortly.


11 Responses to "How to Identify Juliana Jewelry – Chapter 2"

Thank you Kim

I have book marked your blog. I do not look for D & E jewellery amongst the large amount we obtain here in the UK – but really must start!

So will have to read and digest this excellent blog. Because even if I do not find any it is so interesting


Great article and information. Thank you!

Great information. Thank you!

Great information! Thank you!

I’m really impressed with the writing style and images in your article, it was a pleasure to read. Great work! X

thank you so much for posting your blog – i have now identified a gorgeous blue cameo pin i bought as definitely being D&E

So glad I could be of help.

Do you every take a peek at a person jewelry to see if it’s Julian? If so I could send pictures. Thanks

Thank you Connie for visiting my blog. While I do not verify other people’s jewelry, please check back often, as I plan on expanding my library. My Best!

This is so very informative. Thanks so much.

I’m glad it helped… I do plan on expanding the blog and the gallery in 2014 – I have a lot of D&E to share 🙂

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

Sponsored By:

Cranberry Manor
Exceptional Antiques and Collectibles.

www.cranberry-manor. com

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 45 other followers

Follow Juliana Jewelry Blog on WordPress.com

CranberryManor on Twitter

%d bloggers like this: